Home of the BEST Garage Door Driveway Ramp in NZ – Mini-KERBY™
The Best Garage Door Ramp that’s super-strong, QUIET, simple & effective
Meet Mini-KERBY™, The Best Garage Door Ramp that's the best looking Aluminium Fixed Ramp around that is suitable for almost all situations – even workshops – designed to stop the annoying bump and you bouncing over the concrete cut-out of your driveway entrance!
What is Mini-KIRBY, CURBY, KERBY?
Mini KERBY™ – The BEST Garage Door Driveway Ramp
The Best Garage Door Ramp (Mini-KERBY™) was designed right here in Rolleston (Selwyn, Christchurch NZ), custom made for our situation – to Banish that Bump and stop you bouncing over the curb / kerb garage door lip – but we quickly found it has even more applications…
We had ‘had enough’ of that b@$stard “bump” every time we went in or out of our garage – if you hit the lip hard enough it kept destroying our wheel alignment each month, therefor making our car steer badly and our tyres wear out faster. I used to spend heaps on wheel alignments and new tyres. “Enough!” I said, let’s design the best Aluminium Fixed Ramp Extrusion (Garage Door Ramp) we can imagine, so we did – it’s better than awesome I reckon!
“Whatever the application: access ramps, entry ramps, garage ramps, curb or driveway ramps for your garage or even wheelchair access. We even use KERBY™ for caravan or motorhome access ramps, plus they are great for trailer chocks – you name it, it works!”.
Car Vehicle Flat ramp for the entrance to the Garage, mounted on the concrete floor so your lowered car can drive straight in without scraping off the bottom off your car – Banishing That Bump!
This is for 2.5m (but can be customised bigger or to any size). This is unique to the market and just brand new. No one else is doing this.
In this case we lifted the car up +15mm and banished that bump for a nice smooth entrance. NB: All entrances are different so we can custom fit just for you if needed. A 4m or Double Garage entrance will be x2 2.5m ramps, one cut to size (an additional cost).
Made from T6 Aluminium aircraft grade – Indestructible – Great for workshops for forklifts!
Have a cut-out or dip in the garage entrance door floor that your car bumps over when you drive straight in? Annoyed of your garage door dip and want a nice fast QUIET smooth entry? This is for you. Great Christmas prezzy too!
This is for 2.5m of flat ramp. You can even etch prime them and paint them any colour! Me personally, I can powder coat them any colour for you, just let me know. It’s an extra $100, just let me know as it takes an extra week.
This can simply be glued in place, but I like to dynabolt them in with 316 Stainless Steel M10x50’s. They come with pre-drilled holes and all these fittings. I even have a nylon hole cover to make it look sexy. I can install it for you in this price. Canterbury only.
How do these ramps look!? Want to banish your driveway bump?
Car (or Forklift) bottoming out or scraping, need quicker smoother, SAFER access, or simply just want to BANISH THAT B@$TARD BUMP?!
These heavy duty Aluminium driveway ramps, or garage door entry lip ramps or whatever you want to call them are designed to solve many problems, like BANISHING ’THE B@$STARD BUMP’ as you drive in and out, stopping banging noise, stopping you bouncing over the curb lip, and saving your expensive wheel alignment, in turn saving your tyres. Mini-KERBY™ looks and performs the best.
Why risk damaging your car every time you pull in or out of your driveway?
Stop bottoming out, scraping, bouncing & bumping over the garage door lip, and making banging noises when you drive in and out of your house. Stop that annoying bump and fill the gap between your driveway and the street access with a smooth easy speedy and safe entry and exit with Mini-KERBY™ – the best driveway ramp in Rolleston Christchurch, NZ and can be installed locally at your place in a flash.
Want to eliminate that annoying bump in your driveway?
Mini-KERBY™ The Best Garage Door Driveway Ramp is the best way to stop your wheels going out of alignment!
The Best Garage Door Ramp (Mini-KERBY™) is a super-strong Aluminium Fixed Ramp system that fixes into the garage door lip area with 10mm sleeve anchors (Dynabolts), or sometimes concrete screws, to enable a superior smoother, safer transition over the curb/gutter. So no more bumping – Mini-KERBY BANISHES THAT B@$TARD BUMP! – and no more grinding the front off your car off, and no more expensive wheel alignments all the time! In fact, you can get on and off the road faster, smoother, quieter and more safely with confidence. You’ll forget it’s even there!
The Best Driveway Garage Door Ramp (KERBY™) is far superior to any other bent flat Steel, rubber ramp or Aluminium tread-plate folded ramps that degrade or sag and bend easily and quickly over time – they don’t look good and don’t keep performing. We’re all about good looks and first impressions right? Mini-KERBY™, The Best Garage Door Ramp solves this problem and are in my opinion, are the best looking, most flexible and durable Aluminium Fixed Ramp option on the market that I know of. Mini-KERBY™ is designed to take even the heaviest truck. Mini-KERBY™can be ordered in many different ways and lengths to best suit you and your situation. Contact us Click here…
What's the cost of The Best Garage Door Driveway Ramp?
MINI-KERBY™ Pricing
The Best Garage Door Driveway Ramp, Mini-KERBY™ comes in 2.5m standard lengths and we can mix and match and cut to size multiple items in many combinations to suit your driveway width. There are two styles you can order Mini-KERBY™ in…
Professionally “PRE-DRILLED” with Fixing Holes – You can install these yourself but you’ll need all the special tools (see below).
“INSTALLED” – We do it all for you.
We just need to know your physical address and email address for the quote and the total width of the driveway/access point, plus a configuration of Mini-KERBY™ length(s) that may be required etc, see our quote/order form here.
| Length | Configuration | Price |
| 1m | 1x 2.5m length (5 Holes) | $500 |
With PRE-DRILLED (DIY) lengths you need a 20mm diameter long socket to fix the supplied Dynabolts in place through the top of Mini-KERBY™’s 20mm top hole, into the 10mm base holes; 10mm x 50mm Stainless Steel Dynabolts are supplied as additional extras (these fixings are normally $5+GST each, typically as per how many holes you have); and a 10mm concrete drill bit for drilling the holes in the gutter area concrete, after measuring up and marking the holes on the concrete in dry weather. You will need to clean the concrete area before you start – to be free from leaves, stones, dust and debris, and after you drill to install to get rid of the debris and dust.
NB: Stainless steel fixings (Dynabolts) will be supplied as per how many holes you have.
| Length | Configuration | Price |
| 1m | 1x 1m length (5 Holes) | $550 |
Full install means 1x site visit & all labour and fixings included.
Fixings are: Stainless Steel Sleeve-Anchors (Dynabolt fixings) and Nylon Dome Covers to suit and hi-strengeth mounting glue are all included.
Installation means drilling holes in the concrete, using special tools to fix down the Stainless Steel Dynabolts/Sleeve Anchors into the concrete (it is removable later by the way!), and finishing with special nylon dome hole covers to make it look sexy. So we deal with all the uneven concrete levels, the slight curves and irregularities that become apparent when we put a straight edge (the KERBY™) in place, and pack underneath with special wedges (unseen), to make it level and stable amongst doing all sorts of other things to make it long-lasting and hopefully perfect for you.
Currently “INSTALLATION” areas are mainly Christchurch and Selwyn Urban areas only, Waimakariri (including Pegasus) and neighbouring districts, Rural and the wider Canterbury area and neighbouring regions incur a call-out fee starting at $50+GST.
NB: Aluminium prices fluctuate, so please bear with us if the prices go up again (it is out of our control). Freight/shipping and custom or ‘tricky’ installation costs vary and are additional. All prices are +GST and are subject to change.
| Length | Detail | Price |
| Any length or lengths up to 10m | 1x Powder Coating Session | $150+GST |
X
We can supply Mini-KERBY™ New Zealand Wide, even Australia!
Freight costs for up to 2.4mm, 10kg or less, length for Christchurch to North Island is around $50+GST.
Freight costs for one 2.5m-4.0m lengths, 12kg or less for Christchurch to North Island varies between $80-$140+GST*.
NB: Freight costs are calculated on your actual address and subject to change, see our quote/order form here.
KERBY. NZ is the Best Garage Door Driveway Ramp that’s super-strong, simple & effective at eliminating that annoying bump when driving over the curb or your access in your driveway.
