BEST FORKLIFT Ramps in NZ – Clint’s Ramps
The Best Forklift Ramps that’s super-strong, QUIET, simple & bump-free
Meet Clint's Forklift Ramp, The Best Forklift Ramps that's the best looking Aluminium Fixed Ramp around that is suitable for almost all situations – even sheds & workshops – designed to stop the annoying bump and you bouncing over the concrete cut-out of your entrance!
What are the Best Forklift Ramps?
Best Forklift Ramps in NZ – For your Warehouse, Worksop, Garage, Shed or Barn entrance and sliding gate entrance and exits
The Best Warehouse Door Ramp (Clint’s Best Forklift Ramps) are designed right here in Rolleston (Selwyn, Christchurch NZ), custom made for any situation – to Banish that Bump and stop your forklift bouncing over the door entrance lip or roller gate assembly track etc…
We had ‘had enough’ of that b@$stard “bump” every time we went in or out of our garage – if you hit the lip hard enough it kept destroying our wheel alignment each month, therefor making our car steer badly and our tyres wear out faster. I used to spend heaps on wheel alignments and new tyres. “Enough!” I said, let’s design the Best Forklift Ramps (Warehouse or Workshop Door Ramp or for your Garage or Workplace) we could imagine, so we did – it’s better than awesome I reckon!
“Whatever the application: Best Forklift Ramps, access ramps, entry ramps, garage ramps, curb or driveway ramps for your garage, even wheelchair access or sliding gate entrance and exits – you name it, it works!”.
USES
Have a cut-out or dip in the garage entrance door floor that your car or forklift bumps over when you drive straight in? Annoyed of your garage door dip and want a nice fast QUIET smooth entry? This is for you.
The image above is a 2.5m piece of flat, folded ramp made into a double garage width with two pieces welded together from the back, so it looks awesome!
This was for a forklift in an Ashburton warehouse.
Car Vehicle Flat ramp or Folded Forklift Ramp to stabilise your loads for the entrances to the Garage or shed or warehouse workshop, mounted on the concrete floor so your lowered car or forklift or truck can drive straight in without scraping off the bottom off your car or wobbling that forklift load – Banish That Bump!
This type of ramp (I call it a Forklift Ramp), is unique to the market and just brand new. No one else is doing this.
SIZINGS
Maximum length is for 2.5m (but can be customised bigger or to any size by welding the lengths together from the back).
We can make a custom ramp to any height too! 5mm-30mm, whatever!
We have a system that we can make a variable height.
So if your entrance has a dip or a slope, we can make a customised ramp to suit, just send through your picture here: CONTACT FORM.
We can make a custom ramp to any depth/width too! 50mm-200mm, whatever!
The bigger the depth the less the bump will be (the angle is less).
So if your entrance has concrete cutout or lip, we can make a customised ramp to suit, just send through your picture here: CONTACT FORM
In this case (in the above image), we lifted the car up +15mm and banished that bump for a nice smooth entrance for the lowered car.
NB: All entrances are different so we can custom fit just for you if needed. For a 4m or Double Garage entrance will be x2 2.5m ramps, one cut to size (an additional cost), or 2x the same lengths to suit the width at equal lengths welded together).
QUALITY
Made from top quality Aluminium – it’s indestructible – great for workshops for forklifts and trucks – it’s super-strong and no flexing!
You can even have a 6mm Aluminium Chequer Plate top for grip.
Did I mention Health & Safety!?
Stabilise your forklift loads – you don’t want to damage your loads, what would that cost?!
CUSTOMISE YOUR COLOURS!
You can even etch prime them, powder coat them and paint them any colour!
Me personally, I recommend powder coating them any colour for you, just let me know. It’s an extra $100, just let me know as it takes an extra week.
FIXING
This can simply be Dynabolted in place. I use a Dynabolt (Sleeve Anchor) in 316 Stainless Steel (M10x50’s).
SUPPLY
The ramps can come with pre-drilled holes and all the necessary fittings if requested.
Normally, the countersunk holes are 22-23mm in diameter at a depth of 1mm.
The straight through hole is 10.5mm for the Dynabolt.
If you want to Concrete Screw them down, then this is similar.
The countersunk holes will take the heads of the Concrete Screws and will be about 1mm below the surface of the ramp.
FINISHING
I even have black nylon hole covers to make them look sexy (22mm diameter).
INSTALLATION
I can install it for you (Canterbury only at this point in time).
Want to banish your workshop entrance or sliding gate bump?
How do the Best Forklift Ramps look to you!?
Car (or Forklift) bottoming out, bumping over or scraping, need quicker smoother, SAFER access, or simply just want to BANISH THAT B@$TARD BUMP?!
These heavy duty Aluminium driveway ramps, or garage door entry lip ramps or whatever you want to call them are designed to solve many problems, like BANISHING ’THE B@$STARD BUMP’ as you drive in and out, stopping banging noise, stopping you bouncing over the curb lip, and saving your expensive wheel alignment, in turn saving your tyres. The Forklift Ramp looks and performs the best, even takes trucks with loads!
Why risk damaging your car or loosing your forklift load every time you pull in or out of your shed?
Stop bottoming out, scraping, bouncing & bumping over the garage door lip, and making banging noises when you drive in and out of your house or work space. Stop that annoying bump and fill the gap with a smooth easy speedy and safe entry and exit with the Best Forklift Ramps – the Best Forklift Ramps are made in Rolleston Christchurch, NZ and can be installed locally at your place in a flash.
Want to eliminate that annoying bump in your driveway or yard?
Use the Best Forklift Ramps as the best way to stop your wheels going out of alignment and eliminate loosing and damaging your forklift load!
The Best Forklift Ramps are a super-strong Aluminium Fixed Ramp system that fixes into the garage door lip area with 10mm sleeve anchors (Dynabolts), or sometimes concrete screws, to enable a superior smoother, safer transition over the curb/gutter/bump . So no more bumping – The Best Forklift Ramps BANISHES THAT B@$TARD BUMP! – and no more grinding the front off your car off, and no more expensive wheel alignments all the time! In fact, The Best Forklift Ramps create confidence and safety as the benefits are for a safer, faster, smoother access, that’s quieter and more – you’ll forget it’s even there!
The Best Forklift Ramps are far superior to any other bent flat Mild Steel or rubber ramp that degrade or sag and bend easily and quickly over time – they don’t look good and don’t keep performing. We’re all about good looks and first impressions right? The Best Forklift Ramps solves many problems and are in my opinion, the best looking, most flexible and durable Aluminium Fixed Ramp option on the market that I know of. The Best Forklift Ramps are designed to take even the heaviest truck. The Best Forklift Ramps can be ordered in many different widths and lengths to best suit your particular situation. Contact us Click here…
What's the cost of The Best Forklift Access Ramp?
Forklift Ramp Pricing
The Forklift Ramp comes in 2.5m standard lengths and we can mix and match and cut to size multiple items in many combinations to suit your driveway width. There are two styles you can order Forklift Ramp in…
Professionally “PRE-DRILLED” with Fixing Holes – You can install these yourself but you’ll need all the special tools (concrete drill and tube socket etc), or, “INSTALLED” – We do it all for you. We just need to know your physical address and email address for the quote and the total width of the garage, warehouse or shed access point, plus a configuration of Forklift Ramp length(s) that may be required etc, see our quote/order form here.
| Length | Configuration | Price |
| X1 | 2.5m length (5 Holes) | $500 |
With PRE-DRILLED (DIY) lengths you need a 20mm diameter long socket to fix the supplied Dynabolts in place through the top of ramp’s 22-23mm top hole, into the 10.5mm base holes; 10mm x 50mm Stainless Steel Dynabolts are supplied as additional extras (these fixings are normally $5+GST each, typically as per how many holes you have); and a 10mm concrete drill bit for drilling the holes in the gutter area concrete, after measuring up and marking the holes on the concrete in dry weather. You will need to clean the concrete area before you start – to be free from leaves, stones, dust and debris, and after you drill to install to get rid of the debris and dust.
NB: Stainless steel fixings (Dynabolts) will be supplied as per how many holes you have.
| Length | Configuration | Price |
| X1 | 2.5m length (5 Holes) | $550 |
Full install means 1x site visit & all labour and fixings included.
Fixings are: Stainless Steel Sleeve-Anchors (Dynabolt fixings) and Nylon Dome Covers to suit and hi-strengeth mounting glue are all included.
Installation means drilling holes in the concrete, using special tools to fix down the Stainless Steel Dynabolts/Sleeve Anchors into the concrete (it is removable later by the way!), and finishing with special nylon dome hole covers to make it look sexy. So we deal with all the uneven concrete levels, the slight curves and irregularities that become apparent when we put a straight edge (the ramp) in place, and pack underneath with special wedges (unseen), to make it level and stable amongst doing all sorts of other things to make it long-lasting and hopefully perfect for you.
Currently “INSTALLATION” areas are mainly Christchurch and Selwyn Urban and Rural areas only, Waimakariri (including Pegasus) and neighbouring districts, Rural and the wider Canterbury area and neighbouring regions incur a call-out fee starting at $50+GST.
NB: Aluminium prices fluctuate, so please bear with us if the prices go up again (it is out of our control). Freight/shipping and custom or ‘tricky’ installation costs vary and are additional. All prices are +GST and are subject to change.
| Length | Detail | Price |
| Any length or lengths up to 10m | 1x Powder Coating Session | $150+GST |
We can supply Mini-KERBY™ New Zealand Wide, even Australia!
Freight costs for up to 2.2mm, 10kg or less, length for Christchurch to North Island is around $50+GST.
Freight costs for one 2.3m-4.0m lengths, 12kg or less for Christchurch to North Island varies and is around $125+GST*.
NB: Freight costs are calculated on your actual address and subject to change, see our quote/order form here.
Clint’s Forklift & Sliding Gate Ramps are the Best Forklift Ramps that’s super-strong, simple & effective at eliminating that annoying bump when driving over the concrete cutout of the garage or automatic sliding gates of your access in your driveway.
